top of page
Search

Hurricane Clips: The Off-Season Upgrade That Can Lower Your Insurance Bill

AJ
Nov 3
4 min read

Hurricane season officially ends November 30. For most Florida homeowners, that's when storms drop off the radar until next June. But the quiet months are the best time to fix one of the most overlooked weak points on older Florida homes: how the roof is attached to the walls.


What hurricane clips actually do


When hurricane-force wind moves across a roof, it creates uplift, the same force that lifts an airplane wing. In many older homes, the roof trusses are held to the walls only by nails driven in at an angle, called toe nails. Hurricane clips and straps are metal connectors that tie each truss or rafter to the top of the wall, giving the roof a much stronger grip on the structure below.


That matters because once a section of roof lifts, wind and rain get inside. That's often the difference between a manageable claim and a home that's unlivable for months.


Why your insurance company cares


Florida law requires insurance companies to offer discounts for features that reduce hurricane damage. You prove those features with a wind mitigation inspection, recorded on the state's Uniform Mitigation Verification Inspection Form (OIR-B1-1802).


One section of that form grades your roof-to-wall attachment. From weakest to strongest, the main categories are:

  • Toe nails: nails only, with no metal connector

  • Clips: a metal connector nailed into the truss and the wall

  • Single wraps: a metal strap that wraps over the top of the truss

  • Double wraps: wrapping straps on both sides of the truss


Moving up even one category can change the wind portion of your premium, which is often the biggest piece of a Florida homeowners policy. A completed inspection form is good for five years, as long as nothing material changes on the home.


There's good news for 2026, too. A revised version of the form took effect April 1, and it now gives credit to tested retrofit connectors installed to the manufacturer's specifications, based on their rated uplift strength rather than only how they look. That makes it easier for a properly done retrofit to earn the credit it deserves.


Can clips be added to an existing home?


Often, yes. Contractors generally reach the roof-to-wall connection one of three ways:

  • From the attic, if there's enough room to work where the roof meets the wall

  • From outside, by removing the soffits under the roof overhang

  • From the top, by removing the bottom row of roof sheathing, which is easiest during a roof replacement


A few things to know before you hire anyone:

  • To earn the credit, every truss or rafter has to be upgraded, not just the easy ones to reach.

  • The connectors must be approved for retrofit use and installed per the manufacturer's instructions.

  • This is often work for a licensed general, building or residential contractor, not only a roofer. Look for someone experienced with wind mitigation upgrades.

  • When the work is finished, get a new wind mitigation inspection so the upgrade is documented.


Getting a new roof? Read this first.


If you're replacing your roof anyway, that's the cheapest and easiest time to upgrade the roof-to-wall connection, since the sheathing is already coming off.


In some cases it's required. Under the Florida Building Code, a full roof replacement on an older site-built home (generally one permitted before March 2002) in a wind-borne debris region, with an insured or assessed value of $300,000 or more, typically has to include roof-to-wall improvements. That added work is capped at 15% of the cost of the re-roof. Your roofer or local building department can tell you exactly what applies to your home.


Help paying for it


Florida's My Safe Florida Home program offers state grants for hurricane-hardening upgrades, and roof-to-wall connections are one of the eligible improvements. The program is for homesteaded, owner-occupied single-family homes and townhouses. Grants go up to $10,000 in state money. Most homeowners share the cost, with the state paying $2 for every $1 they put in, and low-income homeowners may not need to contribute at all.


Funding comes in rounds and the application window opens and closes, so check mysafeflhome.com for the current status before you plan around it.


Where to start


  1. Find your most recent wind mitigation report and see which roof-to-wall box is checked. If you don't have one, or it's more than five years old, schedule a new inspection.

  2. If it says toe nails, get a retrofit quote, or plan to do the upgrade with your next roof.

  3. Once the work is done and re-inspected, send the new report to us.


We'll make sure your discount is applied. And because we work with more than 40 carriers, we can also check whether another company would reward your upgraded home with a better rate.


Questions about your wind mitigation report, or what clips could mean for your premium? Call us at 727-209-2886.


Discounts, eligibility and code requirements vary by home, carrier and county. This article is general information, not engineering, construction or legal advice.

 
 
 

Comments


© 2026 Trump Insurance Inc. · 13139 66th St N, Largo, FL 33773 · Mon–Fri 9am–5pm

  • Facebook
  • Linkedin
bottom of page